Munchkin Baby Thermometer
In order to buy non-prescription medicines you must be a registered user of our site as we are obliged to record your transaction history. We also ask that you complete our questionnaire so our pharmacy team can check that this product is suitable for you to buy.
Disabled or chronically sick people can claim VAT relief on purchases for personal or domestic use that are applicable to their disability or sickness.
Check store stock overlay
Product details
The Munchkin Mini Thermometer comes in a travel-ready storage case with magnetic closure and its compact and discrete size is perfect for on-the-go and at home.
It uses no touch infrared technology to give you accurate results anytime — even while they sleep.
A quick and easy scan delivers precise readings in one second.
Simply hold near forehead, press the side scan button, and wait for the beep.
Green indicates a normal body temperature, red indicates a high or elevated range, and blue indicates low.
After reporting a temperature, the Mini Thermometer will also flash blue to indicate that it’s ready to take the next reading. With a travel-ready carrying case, this non-contact digital thermometer is a must-have for peace of mind when it matters most, at home and on the go.
How to view previous readings
1. Temperatures are automatically saved in the mini thermometer
2. To view previous temperature readings, with the power off, press and hold the power button for 3 seconds
3. Release the button when the LCD displays 3 dashes
4. The reading number will appear, quickly followed by the temperature reading. Up to 20 temperature readings can be saved.
5. Press the power button to move through previous readings.
6. Press and hold the power button again for 3 seconds to turn the unit off
Suitable for
Adult Use Only
How to use
LCD displays 3 dashes. 3. Press the power button to step through previous readings. 4. Press and hold the power button again for 3 seconds to turn the unit off. HOW TO REPLACE THE BATTERY 1. When the “low battery” symbol appears on the display, replace the CR2032 coin battery. 2. Use a #1 Philips-head screwdriver (included) to remove the battery cover. 3. Pull the battery out using your fingers or with an insulated tool. 4. Insert a new battery into the compartment. Match the correct + and - polarity. 5. If the display shows "LO": The target temperature is below the measurement limit of the device. It might also indicate low voltage. Please replace the battery.
Hazards and Cautions
internal chemical burns if swallowed. Dispose of used batteries immediately. Keep new and used batteries away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
Important info
WARNING: • For adult use only. Keep this product away from children. • Intended to be used by consumers in household environment. Do not make medical judgements based on the thermometer reading. Seek medical attention and follow instructions from your health care provider. • Do not touch or blow on the infrared sensor. Keep the sensor clean. A dirty sensor might lead to incorrect results. • To clean the sensor and case regularly wipe gently with cotton balls or a soft cloth dipped in isopropyl (rubbing) alcohol. Do not use toilet paper or tissue, which might scratch the infrared sensors. • Do not measure temperature during or after a hot bath, long exposure to the sun, cold weather, or strenuous exercise, otherwise the reading might be affected. • At the end of the service life of this product, do not discard it in the garbage. Please discard used batteries according to national and local regulations. • Do not disassemble or repair your thermometer. • Do not place or use the thermometer near water, high temperature, humidity, direct sunlight, dust, or corrosion.
