Boots Multi-User Blood Pressure Monitor
In order to buy non-prescription medicines you must be a registered user of our site as we are obliged to record your transaction history. We also ask that you complete our questionnaire so our pharmacy team can check that this product is suitable for you to buy.
Disabled or chronically sick people can claim VAT relief on purchases for personal or domestic use that are applicable to their disability or sickness.
Stock coming soon
This product is temporarily unavailable online. Use ‘Find in store’ below to see if it’s in stock near you.
Check store stock overlay
Product details
FAST AND ACCURATE MONITORING FOR MULTIPLE USERS
- 2 users + guest mode x 60 memories
- Universal Cuff for arm circumference 22-42cm
- Clinically validated + validation for pregnancy, pre-eclampsia and Type 2 Diabetes
- Blood Pressure Indicator
- Movement Detection
- Irregular Heartbeat Detection
Measuring and monitoring your blood pressure at home can help you to understand your condition and if needed, seek early intervention to keep your blood pressure under control.
Our clinically validated Boots Multi-User Blood Pressure Monitor is easy to use for fast and accurate results. It can be used for 2 users, with 60 memories, as well as featuring a guest mode.
Suitable for
Clinically validated for use during pregnancy, pre-eclampsia and for those with Type 2 diabetes.
How to use
How to use:
Please read the instruction manual before using this product for full set up and usage instructions.
After installing batteries, and setting date and time:
Apply the cuff:
- After removing all jewellery such as watches or bracelets from your left arm, roll or push up your sleeves to expose the skin. Make sure your sleeve is not too tight, if so remove any tight-fitting or thick clothing from your arm while you take a measurement.
- Plug the arm cuff into the monitor by inserting the air plug into the air jack securely until it clicks.
- Apply the arm cuff to your upper left arm, with the bottom edge of the arm cuff 1-2cm above the inside elbow. The air tube should be on the inside of your arm and aligned with your middle finger.
- Then wrap the cuff securely.
Start the Measurement (using a saved user ID)
1. Select your user ID - 1 or 2.
2. The arm cuff will then automatically inflate.
3. When the monitor is off, press the START/STOP button to turn on the monitor. The measurement will start automatically. The 'OK' symbol appears on the display if the arm cuff is wrapped around the arm correctly.
4. Remain still and do not talk until the ensure measurement process is complete. After your monitor has detected your blood pressure and pulse rate, the cuff automatically deflates.
Start the Measurement (using guest mode)
1. For 'guest mode', press and hold the START/STOP button for more than 2 seconds. The user ID symbol and date/time display will disappear. Release the START/STOP button when this happens.
2. The arm cuff will then automatically inflate.
3. When the monitor is off, press the START/STOP button to turn on the monitor. The measurement will start automatically. The 'OK' symbol appears on the display if the arm cuff is wrapped around the arm correctly.
4. Remain still and do not talk until the ensure measurement process is complete. After your monitor has detected your blood pressure and pulse rate, the cuff automatically deflates.
Hazards and Cautions
Warnings:
Keep out of reach of children.
Never diagnose or treat yourself based on your readings. ALWAYS consult with your doctor.
Important info
If you are in doubt about your readings, or your condition, please consult your GP for further advice.
