How to use

• Wash and condition your hair as normal.
• Squeeze out excess moisture with a towel and comb through.
• Hairsprays contain flammable material – do not use while using this product.
• Attach the concentrators or diffuser by fitting it to the front of the hairdryer and twisting clockwise to lock it. Take care when you do this because the attachments can become hot during use. 1. Plug the product into the mains power supply. 2. Switch your hairdryer on and select the desired speed setting (low F or high E) using the speed selector switch. 3. Select the desired heat setting (low N, Hydracare function  or high P) using the heat selector switch. 4. After use, turn the appliance off and unplug it. 5. Let the appliance cool down before cleaning or storing away. Using the Hydracare function
• The Hydracare setting gently dries the hair at a lower temperature for healthier styling.
• To activate select the Hydracare setting ( ) using the heat selector switch.

Hazards and Cautions

• This appliance can be used by children aged from 8 years and above and  persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been supervised/instructed and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children unless they are older than 8 and supervised. Keep the appliance and cable out of reach of children under 8 years. B Do not use this appliance near bathtubs, showers, basins or other vessels containing water.
• When the appliance is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the appliance is switched off. • For additional protection, the installation of a residual current device (RCD)  having a rated residual operating current not exceeding 30 mA is advisable  in the electrical circuit supplying the bathroom*. * Currently, the fitting in a bathroom of an electrical socket suitable or capable of operating the appliance is not permitted in the UK (see BS7671).
• If the supply cord of this unit becomes damaged, discontinue use immediately and return the appliance to your nearest authorised Remington® service dealer for repair or replacement in order to avoid a hazard.
• Always ensure the voltage to be used corresponds to the voltage stated on the unit before plugging the appliance into the mains socket.
• Keep direct airflow away from eyes or other sensitive areas.
• Do not allow any part of the appliance touch the face, neck or scalp.
• During use, always ensure the inlet and outlet grilles are not blocked in any way as this will cause the unit to automatically stop. If this should occur, switch off and allow the unit to cool.
• Keep the power plug and cord away from heated surfaces.
• Do not leave the appliance unattended while plugged in.
• Do not place the appliance on any soft furnishings.
• Do not use attachments other than those we supply.
• Do not set the appliance down while still on.
• Do not twist or kink the cable, or wrap it round the appliance.
• Do not use the appliance if it is damaged or malfunctions.
• Check the cord regularly for any sign damage.
• This appliance is not intended for commercial or salon use.

Important info

Country of Origin: China

Address: UK: Remington UK, Regent Mill, Fir Street, Failsworth, Manchester, M35 0HS

EU: Spectrum Brands Appliances | (Ireland) Ltd., Unit B12,
Ballymount Corporate Park, Ballymount, Dublin, Republic of Ireland
uk.remington-europe.com