Stylpro Cleansing Bundle

How to use

Charging

Plug the Jack into the circle next to the ‘DC’ letters. You will need to push with force to pierce the silicone the first time you plug in the Jack.

Plug the USB charging cable (provided) into the USB port, and into a USB friendly power source.

Once the Facial Cleansing Device is plugged in, 2 blue led lights will flash to indicate the device is charging.

How to use cleasner

• Apply your chosen cleanser to your face or device.


• Pull up the ring on the back of the device and place your middle finger through. Short press the On/Off Button to turn on the device. Two blue LED lights will flash twice once the device is on.


• To increase the sonic vibrations short press the ‘+’ Button next to the On/Off Button.


• To decrease the sonic vibrations shore press the ‘-‘ Button next to the On/Off Button.


• Once you have chosen your preferred vibration setting, gently glide the brush over the skin in small circles on your forehead, nose, cheeks and chin.


• Once you have completed your treatment, short press the On/Off Button to turn off the device.


• Rinse your face well and apply your moisturiser to your face.


• Gently rinse your device and pat dry.

• Installing the bathroom mirror


• Choose a flat, gap free and completely smooth surface (e.g. Glass or glossy tiles). Do not mount on a rough, bumpy or textured surfaces or across gaps.


• Clean, rinse and dry the surface with a lint-free cloth. Make sure the surface is completely dry.


• Rinse the suction cup and dry off any excess water.Using two hands, firmly press the suction cup against your chosen surface and twist the ‘cup mount’ clockwise 45° with considerable force until you feel it ‘lock’. A firm, strong twist will be needed.


• Check cup is secure. Please note, unlike ‘classic’ suction cups, this cup is only secured after it has been twisted to the locked position. If you stick the cup without locking, the mirror will fall.


• With two hands, hold the mirror on either side and firmly push it onto the suction cup ball until it snaps on. Please prepare to push hard. Do not press on glass.


• Hook the squeegee on to the neck of the wall suction mount.


• Should you wish to move or remove the wall suction mount from the surface, twist the mount to the left until fully released. You may need to pull the small tab to remove the wall suction mount from the surface.

• Use your left hand to reach behind the mirror and long press the on/off button. This will turn on the anti-fog technology indicated by the wave symbol lighting up red and the led lights will also turn on. Please do not touch the mirrors surface when switched on.


• Once you have finished with the mirror, use your left hand to reach behind the mirror and long press the on/off button to switch off the anti-fog technology and led lights. After 7 minutes of use the mirror will automatically switch off to minimise battery wastage.


• If there are any droplets on the mirror, please use the squeegee to clean the mirror.


• Allow 10 minutes of downtime after every two successive uses.


• When your mirror needs charging the red light will flash, simply lean the mirror towards you and down to a 90° angle from the wall suction mount and the mirror will pop itself out. You do not need to remove the wall suction mount from the wall to remove the mirror.


• Follow the charging instructions above to recharge your mirror.

Hazards and Cautions

Caution:

• Before charging, make sure the charging port and charger are free from water and cleanser residue.


• Do not charge the in any location where it or the charger may become immersed in water.


• Do NOT use your device while charging and do NOT charge for more than 24 hours.


• Only use the charger provided..

• Avoid using clay-based, silicone-based or grainy cleansers, exfoliators or scrubs, as they may damage the soft silicone touch-points.


• If you have a skin condition or any medical concerns, please consult a dermatologist before use.


• Cleansing with the device should be comfortable – if you experience discomfort, discontinue use immediately and consult a physician.


• Exercise particular care when cleansing the under-eye regions and do not bring the device into contact with the eyelids or eyes themselves.


• For reasons of hygiene, we do not recommend sharing your device with anyone else.


• Avoid leaving your device in direct sunlight and never expose it to extreme heat or boiling water.


• Close supervision is necessary when this device is used by, on, or near children, as well as those with reduced physical and mental abilities.


• Never use the device or charger if they are damaged, and only use the charger supplied by STYLPRO with the device.


• Discontinue use if this product appears damaged in any way. This product contains no serviceable parts.


• To avoid the risk of electric shock, this equipment must only be connected to a supply mains with protective earth.


• Use this device only for its intended use as described in this manual.

• IP65 (water resistant, don't submerge, but it can handle water splashing on it. Avoid directly spraying the mirror)


• Only secure to smooth flat surfaces such as glass, smooth tiles, smooth shower panel, or on a flat ledge.


• Avoid textured tiles, matts wall surfaces (the suction cup may fail off over time)


• Do not place suction cup overtop of a crease.


• Do not drop.


• Do not use near water if dropped.


• Do not press on mirror.


• Do not touch the surface of the mirror when the red heating icon is on or for 10-minutes after use.


• Do not turn back on for at least 10-minutes after two successive uses.

Important info

Country of Origin: China

Address: STYLIDEAS Ltd
AMShold House
Goldings Hill
Loughton
Essex
IG10 2RW